Authorised Distributor
LockBolt & Structural Rivet Gun. Capacity 7.9mm (5/16") 9.5mm (3/8")
Brands you know and trust - Gage Bilt
Lockbolt & Structural Rivet Gun. Gage Bilt? Made in the USA.
The Gage Bilt? 756 gun is designed for the installation of 7.9 mm (5/16') and 9.5 mm (3/8') Lock Bolts (pin & collar) and Structural rivets. This gun can be operated in any position with one hand and a long 24.4mm stroke means it?s capable of setting most fasteners with one pull of the trigger.
Gage Bilt? Lockbolt & Structural Rivet Gun Key Features.
- High quality. Made in the USA.
- Provides optimum stroke for one-cycle installations.
- Compatible with Huck? Nose Assemblies.
Aerobolt services & repair Gage Bilt? tools.
Gage Bilt® - Lock Bolt & Structural Rivet Tool. Made in the USA.
The Gage Bilt® 10756 gun is designed for the installation of 7.9 mm (5/16') and 9.5 mm (3/8') Huckbolts® (pin & collar) and Huck® structural rivets. Made in the USA, this gun can be operated in any position with one hand. A long 24.4mm stroke means it’s capable of setting most lock bolt and structural rivet fasteners in a single trigger.
Gage Bilt® tool key features.
- High quality, made in the USA.
- Provides optimum stroke for one-cycle installations.
- Compatible with Huck® Nose Assemblies.
Gage Bilt® Gun HG-10756 technical data; nose assembly supplied separately (additional cost). Dimensions; 443 x 194 (H x L) measurements without nose. Weight; 5.0 kg. Pressure required: 6.21-6.9 bar or 90-100 psi. Huck fastener capacity: Huck bolts (pin & collar) and Huck structural Ø size 7.9 (5/16') & 9.5 mm (3/8') Stroke 24.4mm. Gun pulling force; 44.5 kN. Air joint 1/4" (NPT) National Pipe thread.
Gage Bilt® tool comes with; Pintail deflector, adaptor tube + operating manual.
Aerobolt services & repairs Gage Bilt® lock bolts & structural rivet tools.
| GAGE BILT GUN INSTALLATION GUIDE 10756 |
HUCK FASTENER TYPE | |||||||||
| HUCK STRUCTURAL RIVETS DIAMETER | HUCK BOLTS PIN & COLLAR DIAMETER | |||||||||
| 4.8 | 6.4 | 7.9 | 9.5 | 4.8 | 6.4 | 7.9 | 9.5 | |||
| Aluminium | ✓ | ✓ | ✓ | ✓ | ||||||
| Steel | ✓ | ✓ | ✓ | ✓ | ||||||
| Stainless | ✓ | ✓ | ✓ | ✓ | ||||||
Understanding Nose Assemblies
A nose assembly is the prerequisite attachment that installs either Huck bolts or Structural Rivets - in essence, the link between the Huck gun and the fastener. Huck guns require a nose and their selection depends on the tool, fastener, & diameter.
Lock Bolt guns and their interchangeable nose assemblies provide the versatility to install either a Structural Rivet or a Pin & Collar Huck bolt. At Aerobolt, we can assist with selection, here is an overview of the popular options associated with the HG-10756.
| Fastener Type | Diameter | Nose Assembly Product Code |
| Structural Rivets | 7.9 mm (5/16”) | 99-10HRVT |
| 9.5mm (3/8") | 99-12HRVT | |
| Huck Bolts "MG" | 7.9 mm (5/16”) | 99-10HBLT |
| 9.5mm (3/8") | 99-12HBLT |
Nose Assembly Maintenance.
Keep the nose in good operating condition requires a couple of key tasks:
- Keep nose assembly tight on tool piston.
- Clean nose assembly jaws on a regular basis by removing metal shards from the jaws and other locations with a suitable instrument.
Typical Huck Nose Assembly Cross Section.
Gage Bilt® - Lock Bolt & Structural Rivet Tool. Made in the USA.
The Gage Bilt® 10756 gun is designed for the installation of 7.9 mm (5/16') and 9.5 mm (3/8') Huckbolts® (pin & collar) and Huck® structural rivets. Made in the USA, this gun can be operated in any position with one hand. A long 24.4mm stroke means it’s capable of setting most lock bolt and structural rivet fasteners in a single trigger.
Gage Bilt® tool key features.
- High quality, made in the USA.
- Provides optimum stroke for one-cycle installations.
- Compatible with Huck® Nose Assemblies.
Gage Bilt® Gun HG-10756 technical data; nose assembly supplied separately (additional cost). Dimensions; 443 x 194 (H x L) measurements without nose. Weight; 5.0 kg. Pressure required: 6.21-6.9 bar or 90-100 psi. Huck fastener capacity: Huck bolts (pin & collar) and Huck structural Ø size 7.9 (5/16') & 9.5 mm (3/8') Stroke 24.4mm. Gun pulling force; 44.5 kN. Air joint 1/4" (NPT) National Pipe thread.
Gage Bilt® tool comes with; Pintail deflector, adaptor tube + operating manual.
Aerobolt services & repairs Gage Bilt® lock bolts & structural rivet tools.
| GAGE BILT GUN INSTALLATION GUIDE 10756 |
HUCK FASTENER TYPE | |||||||||
| HUCK STRUCTURAL RIVETS DIAMETER | HUCK BOLTS PIN & COLLAR DIAMETER | |||||||||
| 4.8 | 6.4 | 7.9 | 9.5 | 4.8 | 6.4 | 7.9 | 9.5 | |||
| Aluminium | ✓ | ✓ | ✓ | ✓ | ||||||
| Steel | ✓ | ✓ | ✓ | ✓ | ||||||
| Stainless | ✓ | ✓ | ✓ | ✓ | ||||||
Understanding Nose Assemblies
A nose assembly is the prerequisite attachment that installs either Huck bolts or Structural Rivets - in essence, the link between the Huck gun and the fastener. Huck guns require a nose and their selection depends on the tool, fastener, & diameter.
Lock Bolt guns and their interchangeable nose assemblies provide the versatility to install either a Structural Rivet or a Pin & Collar Huck bolt. At Aerobolt, we can assist with selection, here is an overview of the popular options associated with the HG-10756.
| Fastener Type | Diameter | Nose Assembly Product Code |
| Structural Rivets | 7.9 mm (5/16”) | 99-10HRVT |
| 9.5mm (3/8") | 99-12HRVT | |
| Huck Bolts "MG" | 7.9 mm (5/16”) | 99-10HBLT |
| 9.5mm (3/8") | 99-12HBLT |
Nose Assembly Maintenance.
Keep the nose in good operating condition requires a couple of key tasks:
- Keep nose assembly tight on tool piston.
- Clean nose assembly jaws on a regular basis by removing metal shards from the jaws and other locations with a suitable instrument.
Typical Huck Nose Assembly Cross Section.
