Huck Gun 10256 Air/Pneumatic for Dia. 7.9 & 9.5 mm (5/16 & 3/8) Huck Bolts and Structural Rivets

Brands you know and trust - Huck

Powerful Huck Air Gun 10256 designed for 7.9 & 9.5 mm diameter Huck® fasteners. 

Made in the USA, the 10256 Huck gun is predominantly built for the installation of 7.9 mm (5/16') and 9.5 mm (3/8')  Huckbolts® (pin & collar) and Huck® structural rivets with the purchase of a nose assembly at an additional cost. Check the Huck Gun blog.

Huck gun key features.

  • High quality Huck®. Made in the USA
  • Provides optimum stroke for one-cycle installations.
  • Features a concentric (inline) pull piston
  • Plated piston rods extend seal life.
  • Nose Assemblies sold separately.

Authorised Distributor Since 1993. Trust us with Huck®

MAIN INCLUSION:


Huck Air Gun 10256 for Huck Bolts & Structural Rivets - DIA  7.9 mm  (5/16
Huck Air Gun 10256 for Huck Bolts & Structural Rivets - DIA 7.9 mm (5/16") & 9.5 mm ( 3/8")* (Gun Only).

(Out of stock)

Powerful Huck Air Gun 10256 designed for 7.9 & 9.5 mm diameter Huck? fasteners. 

Made in the USA, the 10256 Huck gun is predominantly built for the installation of 7.9 mm (5/16") and 9.5 mm (3/8")  

+

Product Code: HG-10256

$8,294.00 Incl. GST (Out of stock)

ADD GUN NOSE:

  • Huck Bolt MG Assembly 7.9mm (5/16) Huck Bolt Magna-Grip Nose 7.9mm (5/16)
    - +
  • Huck Bolt Nose 9.5mm (3/8) Pre-order Huck Bolt Magna-Grip Nose 9.5mm (3/8)
    - +
  • Huck Rivet Magna-Lok Nose 7.9mm (5/16) Pre-order Huck Rivet Magnalok Nose ML 7.9 mm (5/16)
    - +
  • Huck Rivet Nose Assembly 9.5mm (3/8) Pre-order Huck Rivet Magnalok Nose ML 9.5mm (3/8)
    - +
$8,294.00 Incl. GST

Powerful Huck 10256 designed for 7.9 & 9.5 mm diameter Huck® fasteners 

Made in the USA, the 10256 Huck gun is predominantly built for the installation of 7.9 mm (5/16') and 9.5 mm (3/8')  Huckbolts® (pin & collar) and Huck® structural rivets with the purchase of a nose assembly at an additional cost. 

Huck gun key features

  • High quality Huck®. Made in the USA
  • Provides optimum stroke for one-cycle installations.
  • Features a concentric (inline) pull piston
  • Plated piston rods extend seal life.
  • Nose Assemblies sold separately

Huck Gun HG-10256 technical data; nose assembly supplied separately (additional cost). Dimensions; 380 x 200 (H x L) measurements without nose. Weight; 5 kg. Pressure required: 6.21-6.9 bar or 90-100 psi. Huck fastener capacity: Huck bolts (pin & collar) and Huck structural Ø size 7.9 (5/16') & 9.5 mm (3/8') Stroke 22.35mm.  Huck Gun pulling force; 44.4 kN. 

HUCK GUN
INSTALLATION GUIDE
HG-10256
HUCK FASTENER TYPE
HUCK STRUCTURAL RIVETS DIAMETER HUCK BOLTS PIN & COLLAR DIAMETER
4.8 6.4 7.9* 9.5* 4.8 6.4 7.9* 9.5*
Aluminium        
Steel        
Stainless        

* Subject to correct nose assembly

Huck gun 10256 comes with a manual, air line with rotating fittings, bleed bottle, bleed tool and reduction tube.

Understanding Nose Assemblies

A nose assembly is the prerequisite attachment that installs either Huck bolts or Structural Rivets - in essence, the link between the Huck gun and the fastener. Huck guns require a nose and their selection depends on the tool, fastener, & diameter. 

Huck Nose Assemblies

Lock Bolt guns and their interchangeable nose assemblies provide the versatility to install either a Structural Rivet or a Pin & Collar Huck bolt. At Aerobolt, we can assist with selection, here is an overview of the popular options associated with the HG-10256.

Fastener Type Diameter Nose Assembly Product Code
Structural Rivets 7.9 mm (5/16”) 99-10HRVT
9.5mm (3/8") 99-12HRVT
Huck Bolts "MG" 7.9 mm (5/16”) 99-10HBLT
9.5mm (3/8") 99-12HBLT

Nose Assembly Maintenance.

Keep the nose in good operating condition requires a couple of key tasks:

  1. Keep nose assembly tight on tool piston.
  2. Clean nose assembly jaws on a regular basis by removing metal shards from the jaws and other locations with a suitable instrument.

Typical Huck Nose Assembly Cross Section.

Typical Huck Nose Assembly Diagram

Powerful Huck 10256 designed for 7.9 & 9.5 mm diameter Huck® fasteners 

Made in the USA, the 10256 Huck gun is predominantly built for the installation of 7.9 mm (5/16') and 9.5 mm (3/8')  Huckbolts® (pin & collar) and Huck® structural rivets with the purchase of a nose assembly at an additional cost. 

Huck gun key features

  • High quality Huck®. Made in the USA
  • Provides optimum stroke for one-cycle installations.
  • Features a concentric (inline) pull piston
  • Plated piston rods extend seal life.
  • Nose Assemblies sold separately

Huck Gun HG-10256 technical data; nose assembly supplied separately (additional cost). Dimensions; 380 x 200 (H x L) measurements without nose. Weight; 5 kg. Pressure required: 6.21-6.9 bar or 90-100 psi. Huck fastener capacity: Huck bolts (pin & collar) and Huck structural Ø size 7.9 (5/16') & 9.5 mm (3/8') Stroke 22.35mm.  Huck Gun pulling force; 44.4 kN. 

HUCK GUN
INSTALLATION GUIDE
HG-10256
HUCK FASTENER TYPE
HUCK STRUCTURAL RIVETS DIAMETER HUCK BOLTS PIN & COLLAR DIAMETER
4.8 6.4 7.9* 9.5* 4.8 6.4 7.9* 9.5*
Aluminium        
Steel        
Stainless        

* Subject to correct nose assembly

Huck gun 10256 comes with a manual, air line with rotating fittings, bleed bottle, bleed tool and reduction tube.

Understanding Nose Assemblies

A nose assembly is the prerequisite attachment that installs either Huck bolts or Structural Rivets - in essence, the link between the Huck gun and the fastener. Huck guns require a nose and their selection depends on the tool, fastener, & diameter. 

Huck Nose Assemblies

Lock Bolt guns and their interchangeable nose assemblies provide the versatility to install either a Structural Rivet or a Pin & Collar Huck bolt. At Aerobolt, we can assist with selection, here is an overview of the popular options associated with the HG-10256.

Fastener Type Diameter Nose Assembly Product Code
Structural Rivets 7.9 mm (5/16”) 99-10HRVT
9.5mm (3/8") 99-12HRVT
Huck Bolts "MG" 7.9 mm (5/16”) 99-10HBLT
9.5mm (3/8") 99-12HBLT

Nose Assembly Maintenance.

Keep the nose in good operating condition requires a couple of key tasks:

  1. Keep nose assembly tight on tool piston.
  2. Clean nose assembly jaws on a regular basis by removing metal shards from the jaws and other locations with a suitable instrument.

Typical Huck Nose Assembly Cross Section.

Typical Huck Nose Assembly Diagram

Recently Viewed