Structural Adhesives - Bond Flex Plus
Brands you know and trust - Aerobolt
Bond-Flex Plus Structural Adhesive is a high-performance, flexible bonding solution featuring excellent tensile strength and permanent elasticity, specially formulated to withstand short periods of heat associated with powder coating. Ideal for industrial, construction and assembly applications, it offers a longer working time of approximately 20 minutes and allows immediate wet-on-wet painting with water-based paints, providing a strong, durable and reliable bond.
Easy to use structural adhesive suitable for powder coating.
Bond-Flex Plus is a high-performance MS Polymer structural adhesive offering excellent strength, flexibility and adhesion for elastic bonding applications.
Key Technical Properties:
-
DIN 53504 tensile-test result: Greater than 2.70 N/mm²
-
Elasticity modulus at 100% elongation: 1.50 N/mm² (DIN 53504)
-
Elongation at break: Greater than 350% (DIN 53504)
-
Shore A hardness: 60 ± 5 (DIN 53505)
-
Skin formation time: Approximately 20 minutes at 20°C and 65% relative humidity
-
Movement accommodation: ±20%
-
Temperature resistance when fully cured: −40°C to +90°C
These figures represent the material properties reported in the technical data sheet. They should not be interpreted as allowable working loads or guaranteed strength values for completed bonded joints.
Actual joint performance depends on the materials being bonded, surface preparation, adhesive thickness, curing conditions and joint design.
Refer to the manufacturer's technical data sheet for further information and application recommendations.
Formulated to resist short periods of heat associated with powder coating and can be painted immediately after application "wet on wet" with a water based paint.
An alternative to Bond Flex without the high initial tack and green strength. Bond-Flex Plus has double the skin formation time (about 20 min) compared to the original Bond-Flex-giving you more time to work with the adhesive before bonding.
Bond Flex Plus Adhesive Advantages
- Very high bond strength
- Quick build up of end strength
- High performance mechanical properties
- Long open time
- Can be sanded after full cure
- Suitable for warm humid weather
- Easy to tool and finish
- No bubble formation within the sealant
- Colour stable and UV resistant
- Flexible rubber -20% movement
- Does not contain isocyanates or silicone solvents.
Easy to use structural adhesive suitable for powder coating.
Bond-Flex Plus is a high-performance MS Polymer structural adhesive offering excellent strength, flexibility and adhesion for elastic bonding applications.
Key Technical Properties:
-
DIN 53504 tensile-test result: Greater than 2.70 N/mm²
-
Elasticity modulus at 100% elongation: 1.50 N/mm² (DIN 53504)
-
Elongation at break: Greater than 350% (DIN 53504)
-
Shore A hardness: 60 ± 5 (DIN 53505)
-
Skin formation time: Approximately 20 minutes at 20°C and 65% relative humidity
-
Movement accommodation: ±20%
-
Temperature resistance when fully cured: −40°C to +90°C
These figures represent the material properties reported in the technical data sheet. They should not be interpreted as allowable working loads or guaranteed strength values for completed bonded joints.
Actual joint performance depends on the materials being bonded, surface preparation, adhesive thickness, curing conditions and joint design.
Refer to the manufacturer's technical data sheet for further information and application recommendations.
Formulated to resist short periods of heat associated with powder coating and can be painted immediately after application "wet on wet" with a water based paint.
An alternative to Bond Flex without the high initial tack and green strength. Bond-Flex Plus has double the skin formation time (about 20 min) compared to the original Bond-Flex-giving you more time to work with the adhesive before bonding.
Bond Flex Plus Adhesive Advantages
- Very high bond strength
- Quick build up of end strength
- High performance mechanical properties
- Long open time
- Can be sanded after full cure
- Suitable for warm humid weather
- Easy to tool and finish
- No bubble formation within the sealant
- Colour stable and UV resistant
- Flexible rubber -20% movement
- Does not contain isocyanates or silicone solvents.
(60+)