Huck Gun 10224 Air for Huck Bolts & Structural Rivets Ø 4.8 & 6.4 mm (3/16 & 1/4).

Brands you know and trust - Huck®

Huck air gun for Huck bolts & Structural rivets 4.8 & 6.4 mm (3/16 & 1/4).

The HG-10224 is the versatile workhorse of Huck guns, a solid aluminium alloy tool that can install both Huck Bolts and Structural rivets with the simple change over of a nose assembly (priced separately).

The HG-10224 is suitable for both truck fabrication workshops and smash repair operations. Built tough to stand up to the most rigorous working conditions. 

Huck air gun features.

Authorised Distributor Since 1993. Trust us with Huck®

MAIN INCLUSION:


Huck Air Gun 10224 for Huck Bolts & Structural Rivets - DIA. 4.8 mm (3/16') & 6.4 mm (1/4')* (Gun Only)
Huck Air Gun 10224 for Huck Bolts & Structural Rivets - DIA. 4.8 mm (3/16') & 6.4 mm (1/4')* (Gun Only)

(Out of stock)

Huck air gun for Huck bolts & Structural rivets 4.8 & 6.4 mm (3/16 & 1/4).

The HG-10224 is the versatile workhorse of Huck guns, a solid aluminium alloy tool that can install both Huck Bolts


SELECT YOUR OPTIONS:

+

Product Code: HG-10224

$1,712.70 Incl. GST (Out of stock)

ADD GUN NOSE:

  • Huck Bolt Magna-Grip Nose 4.8mm (3/16)
    - +
  • Huck Bolt Magna-Grip Nose 6.4mm (1/4)
    - +
  • Huck Rivet Magnalok Nose ML 4.8mm (3/16)
    - +
  • Huck Rivet Magnalok Nose ML 6.4mm (1/4)
    - +
$1,712.70 Incl. GST

Huck gun for Huck bolts & Structural rivets 4.8 & 6.4 mm (3/16 & 1/4).

The HG-10224 is the workhorse of Huck guns, this solid aluminium alloy tool makes this a versatile tools that can install both Huck Bolts and Structural rivets with the simple change over of a nose assembly (priced separately).

The HG-10224 is suitable for both truck fabrication workshops and smash repair operations. Built tough to stand up to the most rigorous working conditions. 

Huck gun features

Authorised Distributor Since 1993. Trust us with Huck®

Huck gun technical data; Huck Gun Nose Assembly: supplied separately (additional cost). Dimensions 322 x 275 mm (H x L) measurements exclude nose. Huck Gun Pressure required: 6.21-6.9 Bar or 90-100 psi. Huck Gun Stroke; 21 mm. Huck Gun Pulling Force; 19.0 kN.  Huck Gun Fastener Capacity: Huck Bolts 'MG', Lock Bolts 'xtralok' & 'xtragrp", Huck Rivets 'ML', Allok Rivets, Orlock Rivets, High Strength Rivets, Mono rivets, Huckloc, Huck-Tites, Huck Rivets 'MB' etc.  Ø 4.8 mm (3/16'), 6.4 mm (1/4') and *Hucktainers. Hydraulic fluid; Automatic transmission fluid. 

HUCK GUN
INSTALLATION GUIDE
HG-10224
HUCK FASTENER TYPE
HUCK STRUCTURAL RIVETS DIAMETER HUCK BOLTS PIN & COLLAR DIAMETER
4.8* 6.4* 7.8 9.5 4.8* 6.4* 7.9 9.5
Aluminium        
Steel        
Stainless        

* Subject to correct nose assemblies

Understanding Nose Assemblies

A nose assembly is the prerequisite attachment that installs either Huck bolts or Structural Rivets - in essence, the link between the Huck gun and the fastener. Huck guns require a nose and their selection depends on the tool, fastener, & diameter. 

Huck Nose Assemblies

Huck guns and their interchangeable nose assemblies provide the versatility to install either a Structural Rivet or a Pin & Collar Huck bolt. At Aerobolt, we can assist with selection, here is an overview of the popular options associated with the HG-10224.

Fastener Type Diameter Nose Assembly Product Code
Structural Rivets 4.8 mm (3/16”) 99-06HRVT
6.4mm (1/4") 99-08HRVT
Huck Bolts "MG" 4.8 mm (3/16”) 99-06HBLT
6.4mm (1/4") 99-08HBLT

Nose Assembly Maintenance.

Keep the nose in good operating condition requires a couple of key tasks:

  1. Keep nose assembly tight on tool piston.
  2. Clean nose assembly jaws on a regular basis by removing metal shards from the jaws and other locations with a suitable instrument.

Typical Huck Nose Assembly Cross Section.

Typical Huck Nose Assembly Diagram

Huck gun for Huck bolts & Structural rivets 4.8 & 6.4 mm (3/16 & 1/4).

The HG-10224 is the workhorse of Huck guns, this solid aluminium alloy tool makes this a versatile tools that can install both Huck Bolts and Structural rivets with the simple change over of a nose assembly (priced separately).

The HG-10224 is suitable for both truck fabrication workshops and smash repair operations. Built tough to stand up to the most rigorous working conditions. 

Huck gun features

Authorised Distributor Since 1993. Trust us with Huck®

Huck gun technical data; Huck Gun Nose Assembly: supplied separately (additional cost). Dimensions 322 x 275 mm (H x L) measurements exclude nose. Huck Gun Pressure required: 6.21-6.9 Bar or 90-100 psi. Huck Gun Stroke; 21 mm. Huck Gun Pulling Force; 19.0 kN.  Huck Gun Fastener Capacity: Huck Bolts 'MG', Lock Bolts 'xtralok' & 'xtragrp", Huck Rivets 'ML', Allok Rivets, Orlock Rivets, High Strength Rivets, Mono rivets, Huckloc, Huck-Tites, Huck Rivets 'MB' etc.  Ø 4.8 mm (3/16'), 6.4 mm (1/4') and *Hucktainers. Hydraulic fluid; Automatic transmission fluid. 

HUCK GUN
INSTALLATION GUIDE
HG-10224
HUCK FASTENER TYPE
HUCK STRUCTURAL RIVETS DIAMETER HUCK BOLTS PIN & COLLAR DIAMETER
4.8* 6.4* 7.8 9.5 4.8* 6.4* 7.9 9.5
Aluminium        
Steel        
Stainless        

* Subject to correct nose assemblies

Understanding Nose Assemblies

A nose assembly is the prerequisite attachment that installs either Huck bolts or Structural Rivets - in essence, the link between the Huck gun and the fastener. Huck guns require a nose and their selection depends on the tool, fastener, & diameter. 

Huck Nose Assemblies

Huck guns and their interchangeable nose assemblies provide the versatility to install either a Structural Rivet or a Pin & Collar Huck bolt. At Aerobolt, we can assist with selection, here is an overview of the popular options associated with the HG-10224.

Fastener Type Diameter Nose Assembly Product Code
Structural Rivets 4.8 mm (3/16”) 99-06HRVT
6.4mm (1/4") 99-08HRVT
Huck Bolts "MG" 4.8 mm (3/16”) 99-06HBLT
6.4mm (1/4") 99-08HBLT

Nose Assembly Maintenance.

Keep the nose in good operating condition requires a couple of key tasks:

  1. Keep nose assembly tight on tool piston.
  2. Clean nose assembly jaws on a regular basis by removing metal shards from the jaws and other locations with a suitable instrument.

Typical Huck Nose Assembly Cross Section.

Typical Huck Nose Assembly Diagram

Recently Viewed